National-instruments Isolated Analog Input Modules SCC-AI03 Instrukcja Użytkownika Pobierz pdf (Strona 3)

What You Need to Get Started

To set up and use the SCC-AI, you need the following items:

❑ Hardware

– SCC-68

– SC-2345/2350 with one of the following:

• SCC-PWR01

• SCC-PWR02 and the PS01 power supply

• SCC-PWR03 (requires a 7 to 42 VDC power supply,

not included)

– One or more SCC-AI

– 68-pin E/M Series DAQ device

– 68-pin cable

– Quick Reference Label

❑ Software

– The latest version of NI-DAQmx

❑ Documentation

– SCC-AI Series Isolated Analog Input Modules User Guide

– SC-2345/2350 User Manual

– SCC-68 User Guide

– SCC Quick Start Guide

– Read Me First: Safety and Radio-Frequency Interference

– Documentation for your hardware

– Documentation for your software

❑ Tools

– 1/8 in. flathead screwdriver

– Numbers 1 and 2 Phillips screwdrivers

– Wire insulation stripper

Note Software scaling of measurements is not supported on the Macintosh operating

system. Refer to the SCC-AI Module Pin Assignments section.

1 2 3 4 5 6 7 8 ... 13 14

Brak uwag

National-instruments Isolated Analog Input Modules SCC-AI03 Instrukcja Użytkownika Strona 3